2021年6月3日 By admin 0

How to make your own incubator?

1. Make a suitable wooden box. The board should be thick and the seam should be small, which is conducive to the temperature stability. Need to add a few small fans to let the air flow, so that the temperature is uniform, 5V is the best, and the mobile phone charger voltage is the same. The fan should have internal circulation blowing and internal and external convection air

2. As a heating appliance, the lamp for Yuba is very suitable. The number of lamps used depends on the size of your space. It’s better to install more seats in place at one time. After all, it’s much easier to remove the lamp than to install the lamp. If you buy a thermostat Online, you can install more if the power is not enough.

3. The wire must be thick enough. After all, the power may be high. It’s better to use the wire with sheath.

4. Install a switch and close it.

The cost of materials is estimated to be less than 200. It’s the most troublesome thing to make wooden cases. Everything else is simple!

However, the success rate of the proposed egg incubator is very low. It is recommended to buy the egg incubator produced by the manufacturer directly. After many tests, the success rate of this kind of incubator is very high.