Environmental requirements

Variable temperature incubation is to give different temperatures according to the type of incubator, the temperature of the incubation room and the age of embryo development. If the ambient temperature is lower than 20 degrees Celsius, the incubation temperature can be 0.5 to 0.7 degrees Celsius higher than the optimum temperature; if the ambient temperature is higher than 30 degrees Celsius, the incubation temperature can be lowered by 0.2 to 0.6 degrees Celsius.

Ambient temperature has a certain influence on incubation, and the level of ambient temperature mainly affects the accuracy of temperature control in incubation. In production, it is generally flexibly mastered according to different regions and different seasons. Constant temperature incubation and variable temperature incubation are two incubation methods that are often used depending on the ambient temperature. Both constant temperature incubation and variable temperature incubation can achieve better results if they are properly operated. Constant temperature incubation is to maintain a temperature from 1 to 19 days of incubation, such as: 37.8 degrees Celsius; and from 19 to 21 days at 37.2 degrees Celsius, constant temperature incubation requires higher environmental conditions for incubation, and the ambient temperature should be maintained at Between 22 and 26 degrees Celsius and with good ventilation.

Precautions for the use of incubators

1. Read the manual repeatedly before use.

2. Check whether the fan is turned on and whether water is added to the basin. 1. Read the manual repeatedly before use.

2. Check whether the fan is turned on and whether water is added to the basin.

3. When the egg turning is stopped, check whether the egg turning motor and the egg turning program-controlled switch are available.

4. The heater and the joint should be firm to prevent the management personnel from being scalded. When operating inside the box, be sure to unplug the power plug.

5. When using the stove at home temperature, an insulating layer should be placed on the water tray. If the egg tray on the egg rack is not full, try not to put it near the water tray.

6. When the humidity probe is not in use, it is best to take it out of the incubation room. It should be kept dry and prevent dew from hanging. It is strictly forbidden to drink the gas experiment probe. The probe can be held by hand, and the humidity of evaporation can be observed by hand to observe the increase.

3. When the egg turning is stopped, check whether the egg turning motor and the egg turning program-controlled switch are available.

4. The heater and the joint should be firm to prevent the management personnel from being scalded. When operating inside the box, be sure to unplug the power plug.

5. When using the stove at home temperature, an insulating layer should be placed on the water tray. If the egg tray on the egg rack is not full, try not to put it near the water tray.

6. When the humidity probe is not in use, it is best to take it out of the incubation room. It should be kept dry and prevent dew from hanging. It is strictly forbidden to drink the gas experiment probe. The probe can be held by hand, and the humidity of evaporation can be observed by hand to observe the increase.